What You Should Know About Mould Remediation

Mould remediation is commonly referred to as the entire process through which mould is cleaned up and circumvented from growing in an indoor environment or on an object. Though this is a generally accepted definition of mould remediation but there is more to mould remediation than just the removal of mould. Before we go deep into mould remediation and what are involved in the entire process, it is important for us to know what mould is and how it develops.

 

What is Mould?

Mould is a fungus that causes organic material to decay. It develops on fibre and plants. It can also survive in an indoor environment where there is damp or moisture such as the bathroom, attics and bathrooms. Mould survives and breeds in a damp area. The mould spores are very tiny and consequently it can travel through the air.

 

Is Exposure to Mould Dangerous to Health?

The presence of mould in a living environment is inimical to people in the environment. It has been discovered that exposure to mould can cause a lot of diseases especially respiratory related diseases. Some of the diseases that can result from exposure to mould are

·        Watery eyes

·        Asthmatic attack

·        Cold-like symptoms

·        Nasal and sinus congestion

·        Cough

·        Sore throat

·        Skin irritations

 

Where To Discover Mould

There are difference locations that you can look for the presence of mould in your home. Normally, moisture and damp condition favours the growth of mould. So, you can discover mould in any moist or wet material or location like bathroom, places where there is water leaks, flooding and areas with humidity level up to 70% and any flooded area that is not properly dried. Mould can also develop in organic materials such as soap, wood, paper, scum and dirt. If you fold your clothing when they are still wet, then be assured that mould can develop on that article of clothing.

Mould can also grow on concrete walls, if there is damp seeping through the wall. The same thing is applicable to any concrete that seep moisture. This is the reason why mould can develop under cabinets, carpet, and base boards.

 

Prevention Of Mould

Mould can develop anywhere that has a favourable condition for its survival. This is because of the fact that mould spores are available in every place. As you can see from the above, damp condition favours the growth of mould. The best way to prevent mould is to make our environment unfavourable for its survival. You should therefore keep your environment dry and well ventilated so that it will not be favourable to mould. You can also apply air cleaners. However, this can only reduce the number of mould spores in the environment it but does not solve the problem of mould.

 

Elimination Of Mould

Once you notice the existence of mould on any of your material, walls or concrete floor, the best thing to do is to opt for mould remediation. Whether you will do it by yourself or you will need the attention of a professional depends on the level of the growth of the mould. To determine this, you will need mould assessment services. This is the process through which the extent of the mould growth is determined. If the growth level is high, you will require the services of a mould remediation expert. But if it is not much, then you can apply some simple and common mould remediation techniques in order to deal with it.

 

Proper ventilation and exposure to sunlight are the conventional means through which mould remediation can be achieved.


Leave a Reply

Mould Removers